Description

Product Description
Specification:
Certification: NONE
Origin: Mainland China
DIY Supplies: ELECTRICAL
Type: Electronic Device Battery Tester
Model Number: Battery Capacity Tester
Power supply: DC12V±5%
Fan current: 0.72A
Constant discharge current range: 0-10A (whole machine)
Operating mode: Single mode constant current (CC)
Maximum discharge current Error: 0.7% – 0.01A
Max. Capacity test error: 0.5A 2.5%, 2A 1.5%, 5A and above 1.2%
Max. Power: 100W
Input connector: 5.5×2.5mm
Product size: 110 x 80 x 60mm/4.3 x 3.1 x 2.4inch
Operating instructions:
Connect the DC 12V power supply, enter the electronic load mode, make sure it is in the stop state and connect the power supply under test to the test input port. Please note the correct polarity of the connection! Set the constant current via the knob. Note: As it is open work, there is no voltage and power limit, but normal operation should be below 100V and 100W
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x Battery Capacity Tester