Description

Product Description
Specification:
Origin: Mainland China
Type: Module
Condition: New
Description:
The new model has optimized the circuit structure compared with the old model, which makes the power supply work more stable. At the same time increased the input anti-reverse (with 150A MOS anti-reverse) and input low battery (low voltage) protection, and low battery protection voltage from 9-50V adjustable to adapt to a variety of batteries. When using the battery power supply without worrying about battery loss damage to the power module and battery.
Power Description: Since the input current of this power supply is up to 20A, the output power is related to the input voltage. The higher the input voltage, the higher the power, such as input 12V * 20A power is 240W. Input 24V * 20A is 480W. At this time is the maximum power. Due to the limited heat dissipation area, the input voltage exceeds 10A or output current reaches 10, please add 12V fan cooling.
Module Model: SZ-BT07CCCV-A
Module nature: non-isolated boost module (BOOST)
Input voltage: DC10-60V (direct input 10-60V without jumper cap to select the voltage)
Input current: 20A (MAX) more than 15A please add fan cooling (add fan cooling input voltage in 12-24V when the input current can reach 25A)
Static working current: 15mA (12V to 20V, the higher the output voltage, the higher the static current will increase)
Output voltage: 12-83V continuously adjustable (default output to 19V shipping)
Output current: 18A MAX More than 10A, please strengthen the heat dissipation (related to the input and output pressure difference, the larger the pressure difference, the smaller the output current)
Constant current range: 0.5-18A (+/-0.3A)
Input anti-reverse connection: Yes (150A power MOS anti-reverse)
Low battery protection: Yes (9-50V adjustable)
Operating temperature: -40 ~ +85 degrees (ambient temperature is too high, please strengthen the cooling)
Operating frequency: 150KHz
Conversion efficiency: 92%-97% (efficiency and input and output voltage, current, differential pressure related. (The efficiency is related to the input and output voltage, current and pressure difference.)
Input overcurrent protection: Yes (input more than 25A, automatic protection, power supply does not boost)
Short-circuit protection: Yes (input 30A fuse) Double short-circuit protection, safer to use.
Input reverse protection: Yes (150A power MOS tube anti-reverse. Can be reversed for a long time)
Installation: four 3mm copper columns
Wiring: terminal (please use high-current pure copper wire)
Module size: length 130mm width 52mm height 53mm
Module unit weight: 263g
Output power: input voltage * 20A, such as: input 12V * 20A = 240W input 12V when the maximum power of 240W, input voltage * 20A, such as: input 24V * 20A = 480W, that is: input 24V when the most in the power of 480W
Note:
The maximum power is 240W when inputting 12V, 480W when inputting 24V, and 720W when inputting 36V.
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1*DC DC Boost Power Supply Module