Description

Product Description
Specification:
Support for more than DC output voltage when 5V input
Module size: about 25 * 48mm/0.98*1.88” (W * L)
Output current: 2 ~ 20mA. (If you want to add the current, pls put insurance under the transformer replaced the 0-ohm resistor, maximum 50mA, but not recommended increased.)
When the input voltage is 5 v, the output voltage can be adjusted in 280 ~ 1200 v.
When the input voltage is 6 ~ 12v, the output voltage can be adjusted in 400 ~ 1200v.
The capacitor can be charged, but the charging speed is a bit slow, please note.
Like the power of the output module module, it is not possible for the sensor.
Corresponding Product Description: This module is used in security products, stability is quite good
This module with AC output, output around AC 75 v, but can not be adjusted
Product test model:
1. Please refer to the main map, the new output products are generally stable, of course, if you test the output voltage is unstable, you can add a current limiting resistance to the test, usually this problem does not occur.
2. When adjusting the recommended output add a resistance rectifier like the following picture.
Warm Reminder:
This product is supported by the housing (3D PLA printing shell, full-toxic configuration, printing a housing needs an hour long)
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
Package Content:
1 X DC-DC Converter Boost Module