Description

Product Description
Specification:
Model: KWS-MX19
Color: black, white (optional)
Voltage: DC4V-30V (overvoltage protection can be set arbitrarily)
Current: 0-5.5A (overcurrent protection can be set arbitrarily)
Electricity: 0-9999mWh
Capacity: 0-9999mAh
Timing: 0-99 hours
Timing: 0-24 hours
Internal resistance: 0-999.99 ohms
USB: output USB3.0
Power: 0-150W
Product weight: 16g
Product size: 69 * 56 * 25mm/2.72 * 2.2 * 0.98in
Key operation instructions:
1. Setting instructions for timed shutdown: Long press the button for three seconds and the number on the screen will flash. Short press the button once again. Add a 30 minute delay to shut down. Press and hold the button for three seconds to confirm saving the parameters you have set.
2. Overvoltage protection setting instructions: Long press the button for three seconds and the number on the screen will flash. Short press the button once again. Apply a voltage of 0.5 volts. Press and hold the button for three seconds to confirm saving the parameters you have set.
3. Overcurrent protection setting instructions: Long press the button for three seconds and the number on the screen will flash. Short press the button once again. Add 0.5 amps. Press and hold the button for three seconds to confirm saving the parameters you have set.
4. Accumulated working time, power, and capacity: Pressing and holding the button for 3 seconds when returning to the main screen can clear the retained data.
5. Current and voltage calibration method: The standard voltage of 5.000V must be used to press and hold the button. After powering on, the button can be released when Factory Setting is displayed on the screen, and the product can be automatically calibrated.
Attention: During calibration, the product cannot be connected to any load.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x USB Tester