Description

Product Description
Specification:
Model Number: Adjustable Regulator Power Board Kit
Type: PCB Board Electronic Kit
Case size: About 11×6.9x5cm/4.33×2.71×1.96in
PCB board size: About 7.3×6.3cm/2.87×2.48in
Function:
1. The output voltage range of this kit is 1.20V-12V, and the regulated output is continuously adjustable.
2. Power supply: 2W
3. One adjustable signal generator output. It is convenient to provide pulse signal to the test circuit.
4. With logic pen function. It is convenient to test the logic level of the circuit 5, with a buzzer. It can test the continuity of the wire (connect the wire to the positive and signal input terminals of the power supply, the wire will pass – the buzzer will sound). It can also test low-frequency signals, (input the signal from the signal input terminal, if there is a signal, the buzzer will sound)
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x 240Ω (Red Yellow Black Black Brown)
1 x 10Ω (brown black black red brown)
6 x 1N4007 (silver negative)
2 x 1000UF capacitors (long legs positive)
1 x 9014 triode
4 x LED (Long leg positive)
1 x Potentiometer (Type 148)
1 x heat sink
1 x 2p terminal
1 x chip holder
1 x potentiometer cap
1 x 100Ω (brown black black orange brown)
3 x 1kΩ (brown black black brown brown)
2 x 10UF capacitors (long legs positive)
2 x 104 tiles (long legs positive)
1 x potentiometer (100k blue and white)
1 x LM317
1 x screw pack (screw 317 and heat sink)
1 x 3p terminal
1 x 4069 chip
1 x PCB board