Description

Product Description
Specification:
STM32F401CCU6 Core Board V3.0
Frequency: 84mhz
Rom:64kb
Memory :256kb
STM32F411CEU6 Core Board V3.0
Frequency: 100mhz
Rom:128kb
Memory :512kb
Core Board Information
25mhz High Speed Crystal Oscillator 32.768khz 6pf Low Speed Crystal Oscillator
V3.0 Version Began To Use Lead-Free Process, The Needle Is Gold-Plated, More Environmentally Friendly
Reserve Flash Pad And Provide Usbdisk Fatffs Routines
Support For Micropython Programming
Support The Arduino Programming, See Making
How Do I Enter Isp Mode
Method 1: Press And Hold The Boot0 Button And Reset Button While Booting Up, Then Release The Reset Button, And Release The Boot0 Button After 0.5 Seconds
Method 2: Hold Down The Boot0 Key When Powering Off The Device, And Release The Boot0 Key After Powering On The Device For 0.5s
Dfu Mode: Just Use The Data Line To Connect The Computer, If There Is An Unrecognized Problem, You Can Properly Heat The Chip (25 ° C), And Then Re-Enter The Isp Mode
Serial Port: Connect Pa9 And Pa10 Of The Core Board Using Usb To Serial Port
Software: Stm32cubeprog.
No Usb To Serial Port, No Debugger, No Computer Driver, Just A Type-C Data Cable To Complete The Firmware Download
How To Enter Hid Bootloader After Writing To App
Hold Down The Key Key, Click The Reset Key, Led C13 Flashes, Release The Key Key To Enter
Product Size: 53.00 x 21.00 x 5.00 mm/2.09 x 0.83 x 0.2 inch
Type: Module
Old And New
Note:
Due To The Different Monitor And Light Effect, The Actual Color Of The Item Might Be Slightly Different From The Color Showed On The Pictures. Thank You!
Please Allow 1-2 cm Measuring Deviation Due To Manual Measurement.
Package Content:
1 X STM32F401CCU6/STM32F411CEU6 Development Board